ZONESUN

ZONESUN ZS-MG260XP Dual-Head High-Capacity Gear Pump Liquid Filling Machine

$10,199.00 USD

Sleva Vyprodáno

Poštovné se vypočítá na pokladně.

Voltage 220V

Dual-Head High-Capacity Gear Pump Liquid Filling Machine

The ZONESUN ZS-MG260XP Automatic Dual-Head Gear Pump Filling Machine is designed for large-volume filling of compatible water-like to medium-viscosity liquids.

Two independently controlled gear pump filling heads support filling volumes of 2.5–10 L, with a maximum documented flow capacity of up to 150 L/min, depending on pump configuration and product characteristics.

The machine features a 45 L hopper, automatic liquid feeding, PLC touchscreen control, pneumatic bottle positioning, anti-drip collection tray and chain conveyor for continuous production.

Parameter

Model: ZS-MG260XP
Power Supply: 220 V
Power: 3 kW
Air Pressure: 0.6 MPa
Production Capacity: Max. 150 L/min (depending on pump flow rate)
Number of Filling Heads: 2 (customizable)
Filling Volume: 2.5–10 L
Filling Method: Gear Pump Filling
Feeding System: 45 L Material Hopper
Conveyor Dimensions (L × W): 2000 × 190 mm
Conveyor Direction: Right to Left
Machine Dimensions (L × W × H): 2000 × 1000 × 1800 mm
Machine Weight: 300 kg

Suitable for compatible liquids used in food, beverage, cosmetic, household chemical and industrial packaging applications.

An external air compressor is required and should be purchased separately.

Touchscreen Control Panel

Allows operators to set filling parameters, adjust operating settings, and monitor machine operation through an intuitive touchscreen interface.

Dual-Head Gear Pump Filling System

Two gear pump filling heads deliver controlled liquid volumes for consistent filling accuracy and efficient production.

Anti-Drip Collection Tray

Collects residual liquid from the filling nozzles between filling cycles, helping keep the bottles and conveyor clean.

Bottle Pushing Cylinder

Uses a pneumatic cylinder to push bottles from the incoming conveyor into the filling area for accurate positioning and continuous operation.

Large-Capacity Material Hopper

Stores a large volume of liquid and continuously supplies the filling system, reducing frequent refilling during production.

Material Feeding System

Automatically transfers liquid from an external supply source into the hopper, ensuring a stable material supply and reducing manual refilling during production.

Key Features

Two independently controlled gear pump filling heads
Customizable filling-head quantity
Filling range: 2.5–10 L
45 L hopper with automatic liquid feeding
PLC touchscreen control
Pneumatic bottle positioning
Residual-liquid collection tray
2 m × 190 mm right-to-left chain conveyor

How the Filling Process Works

Confirm the liquid, container and filling volume.
Adjust bottle positioning and filling-head alignment.
Connect the external liquid supply to the feeding system.
Set filling parameters on the PLC touchscreen.
Run a test batch and check fill volume and dripping.
Start continuous production and monitor liquid supply and bottle transfer.

How to Choose the Right Configuration

Provide the liquid type, viscosity, filling temperature, target volume, container dimensions and required output. Also confirm the required filling-head quantity, 220 V power supply, 0.6 MPa compressed air and conveyor direction.